What this reconstitution calculator does
This reconstitution calculator answers two questions in order.
- What is the strength of my vial? You enter the mg of peptide in the vial and the mL of water added. It divides one by the other and shows the concentration in mg/mL.
- How many units do I draw? You enter the dose your prescriber gave you, in mg. It turns that dose into mL and then into units on a U-100 insulin syringe, and fills a picture of the syringe to the mark.
That is all it does. It will not suggest a dose, a dose increase, or how much water to add. Those come from your prescriber and your pharmacy.
The tool exists because compounded semaglutide and tirzepatide come in vials at different strengths. Branded pens like Ozempic, Wegovy, Mounjaro and Zepbound are set to a dose in mg. A vial is not. The dose in units depends on the vial's mg/mL, so the same 2.5 mg dose will be a different number of units on two different vials. For many people the pharmacy label already lists the units, and that is enough. The calculator helps when you want to check the label, when you start a new vial at a new strength, or when the numbers on the box and the syringe do not seem to match.
Compounded drugs are not FDA-approved. Always follow the pharmacy's label, and ask your pharmacist if the result here differs from it. For more on dose schedules, see the compounded semaglutide dosage guide. This is general information, not medical advice.
How to use the peptide calculator in 3 steps
Enter the vial and the water
Type the mg of peptide in the vial (it is printed on the vial or the pharmacy label) and the mL of water that was added, or that your instructions say to add. The calculator shows the concentration right away. If your vial already lists a strength in mg/mL, type that strength straight into the vial strength field instead.
Type your prescribed dose
Enter the dose your prescriber gave you, in mg. You can also tap one of the common doses as a shortcut, but only pick the one that matches your prescription. The calculator does not know your plan and will not check whether a dose is right for you.
Pick your syringe and read the units
Choose the syringe size you have. The result shows the units to draw, the same amount in mL, and a picture of the syringe filled to that mark. If the amount is more than the syringe holds, you will see a warning. Compare the result with your pharmacy label before you draw anything, and ask your pharmacist if the two do not match.
BAC water calculator: how the water changes the units
The water you add, often called bac water, does not change how much peptide is in the vial. It changes how spread out the peptide is. That decides how many units hold your dose.
Here is the same vial mixed two ways, using example numbers only:
- 10 mg vial + 1 mL water = 10 mg/mL. A 2.5 mg dose is 0.25 mL, which is 25 units.
- 10 mg vial + 2 mL water = 5 mg/mL. A 2.5 mg dose is 0.5 mL, which is 50 units.
Same vial, same dose, twice the units. This is the most common reason people get confused when a pharmacy changes its mixing instructions or a new vial arrives at a different strength. Use the amount of water your pharmacy or prescriber told you, enter it here, and check that the units match the label. Never change the water amount to make the numbers rounder. If you are setting up your first vial, the compounded semaglutide vial guide walks through what to check.
Peptide calculator for semaglutide and tirzepatide
The math is the same for compounded semaglutide and compounded tirzepatide. Only the numbers you enter change. Example numbers only:
- Semaglutide: a 5 mg vial with 2 mL of water is 2.5 mg/mL. A 0.25 mg dose is 0.1 mL, which is 10 units.
- Tirzepatide: a vial at 10 mg/mL with a 2.5 mg dose is 0.25 mL, which is 25 units.
The label schedules for the branded drugs are listed elsewhere if you want to see where a number comes from. The semaglutide dosage and tirzepatide dosage guides describe what the prescribing information says, and the semaglutide dosage calculator and tirzepatide dosage calculator skip the mixing step when you already know your vial strength. Your own dose and any change to it should come from your prescriber.
Reading the result on a 0.3, 0.5 or 1 mL syringe
On a U-100 insulin syringe, 100 units equal 1 mL. So a 1 mL syringe holds 100 units, a 0.5 mL syringe holds 50 units, and a 0.3 mL syringe holds 30 units. The calculator fills the picture to scale for the size you pick.
A smaller syringe has the marks spread wider, which makes small amounts easier to read. A larger syringe holds more but the marks sit closer together. If your result is larger than the syringe you picked, the calculator will tell you to pick a larger one. Do not split a dose across two draws without checking with your pharmacist first.
Units on an insulin syringe are a measure of volume here, not a measure of the drug. That is why the same units mean a different mg dose on vials of different strength.
How the reconstitution math works
The calculator uses three plain steps. Nothing is hidden.
1. Concentration. Divide the mg of peptide in the vial by the mL of water added.
concentration (mg/mL) = vial mg / water mL
2. Volume of the dose. Divide your prescribed dose by that concentration.
mL = dose (mg) / concentration (mg/mL)
3. Units on a U-100 syringe. Multiply the mL by 100, because 100 units equal 1 mL.
units = mL x 100
Worked example with the numbers from the fact sheet: a 2.5 mg dose from a 10 mg/mL vial is 2.5 / 10 = 0.25 mL, and 0.25 x 100 = 25 units.
The result is rounded for display. Syringe marks are usually in whole units or half units, so if the result falls between marks, ask your pharmacist how to read it. Do not round on your own to reach a different dose.
A few checks will catch most mistakes:
- Make sure the vial amount is in mg, not mcg.
- Make sure the water amount is in mL.
- Make sure your syringe is U-100. Other syringes measure differently and this math will not apply.
- If the result does not match the pharmacy label, trust the label and call the pharmacy.
After you inject, writing it down keeps the next week simple. The Bluedose GLP-1 tracker logs the drug, the dose you typed and the time in a tap, and the injection site rotation map remembers where you injected last. Bluedose is free on the App Store. This is general information, not medical advice.
Runs in your browser, nothing uploaded
The calculator runs entirely in your browser. The numbers you type stay on your device. Nothing is sent to a server, nothing is saved to an account, and there is no sign-up.
The Bluedose app works the same way. There is no account, no ads and no tracking. Your shots, doses, injection sites, side effects and weight stay on your iPhone and in your own private iCloud. If you want the full picture, the private GLP-1 tracker page explains what is stored and where.
If you mix a new vial every few weeks, a reminder helps. Bluedose sends a GLP-1 shot reminder at the time you choose, and on shot day a Lock Screen card shows a Log Shot button. Start for free and keep your dose history in one private place.
Embed this peptide calculator on your site
Free to use on your blog or clinic site. Copy this code:
FAQ
How do I use a peptide reconstitution calculator?
Enter the mg of peptide in the vial and the mL of water added. The calculator divides the first number by the second to get the concentration in mg/mL. Then type your prescribed dose in mg and pick your syringe size. It shows the units to draw. If your vial label already gives a strength in mg/mL, enter that strength directly and skip the mixing step.
How much bac water should I add to my vial?
Use the amount your compounding pharmacy or prescriber told you. This bac water calculator does not choose an amount for you. It shows what happens with the amount you were given: the same mg spread through more water gives a lower mg/mL, so the same dose takes more units. If the instructions are unclear, ask your pharmacist before you mix.
How many units is 2.5 mg from a 10 mg/mL vial?
On a U-100 insulin syringe, 2.5 mg from a 10 mg/mL vial is 0.25 mL, which is 25 units. The math is mL = dose (mg) / strength (mg/mL), then units = mL x 100. These are example numbers. Always use the dose and vial strength your prescriber and pharmacy gave you.
Does adding more water change my dose?
No. The dose in mg stays the same. More water lowers the concentration, so the same mg sits in a larger volume and the syringe reading in units goes up. Less water does the opposite. That is why the units on one vial will not match the units on another vial mixed differently.
Is a peptide calculator the same as a reconstitution calculator?
People use both names for the same job. A reconstitution calculator works out the mg/mL after water is added to a vial. A peptide calculator usually goes one step further and turns a dose in mg into units on a syringe. This page does both in one place.
Which syringe does the calculator assume?
It assumes a U-100 insulin syringe, where 100 units equal 1 mL. Pick the syringe size you have so the picture fills to the right mark. If the result is more than your syringe holds, the calculator will tell you, and you should check your numbers and supplies with your pharmacist.
Does Bluedose calculate or recommend my dose?
No. This tool only converts numbers you type into units. The Bluedose app is a personal log: you type the dose your prescriber gave you, and it keeps the record. It does not give medical advice and does not recommend or calculate doses.
Related guides
More free tools
- Semaglutide calculator
- Tirzepatide calculator
- Mounjaro dosage chart
- Wegovy dosage chart
- Ozempic dosage chart
- Half-life calculator
- Missed dose calculator
Log every vial dose in one tap
Bluedose keeps your doses, injection sites and side effects private on your iPhone, so start for free and keep the math and the record together.
Free on the App Store