Semaglutide dosage calculator: mg to units

Semaglutide dosage calculator: type the dose your prescriber gave you in mg and the strength printed on your vial in mg/mL. You will see how many units to draw on a U-100 insulin syringe and the same amount in mL. The tool calculates from the numbers you enter. It does not choose a dose for you.

mg
mg/mL
Syringe

Draw to

25units

0.25 mL on a 1 mL syringe

Bluedose doesn't recommend doses. Use the dose and vial strength your prescriber gave you.

What this semaglutide calculator does

This calculator turns a dose in milligrams into the amount to draw from a vial. You type two numbers: your dose in mg and your vial strength in mg/mL. It returns the volume in mL and the matching mark on a U-100 insulin syringe in units. It also fills a picture of the syringe to that mark, so you can see roughly where the plunger should stop.

It matters most for compounded semaglutide, which comes in vials at different strengths. The same 0.5 mg dose is a different number of units from one vial to the next. A units figure from a friend, a forum or an old vial will not carry over to a new one. The only numbers that count are the ones on your prescription and your pharmacy's label.

What it does not do:

For many people, a pharmacy label with the units already written on it is enough, and that is a fine way to work. The calculator helps in a few specific moments: when you want to double-check the label, when a refill arrives at a different strength, or when your prescriber moves you to a new dose and you want to see the new mark before shot day. It takes a few seconds and shows its math, so you can follow every step.

How to use the semaglutide dosage calculator

  1. Enter your dose in mg

    Type the dose from your prescription or pharmacy label in milligrams, for example 0.25 or 0.5. You can also tap one of the common doses to fill it in. Those buttons are only shortcuts for typing. They are not a suggestion of what you should take.

  2. Enter your vial strength and pick your syringe

    Find the strength on your vial label, written in mg/mL, and type it in. If the label shows a total amount and a total volume instead, ask your pharmacist for the mg/mL figure rather than guessing. Then choose the syringe size that matches the one you have, so the picture and the size check line up with your syringe.

  3. Read the result and check it

    The tool shows Draw to a number of units, plus the same amount in mL on your syringe size. Compare it with your pharmacy label. If the two disagree, call the pharmacy before you inject. After your shot, you can record the dose, time and spot in a GLP-1 tracker like Bluedose, which is Free on the App Store, so next week you know exactly what you took and where.

Semaglutide units to mg: reading it the other way

Sometimes you already know the units and want the milligrams. Maybe the pharmacy label only lists units, or you want to confirm what a past shot held. The math runs in reverse:

So 20 units from a 2.5 mg/mL vial is 0.2 mL, and 0.2 x 2.5 = 0.5 mg. The same 20 units from a 5 mg/mL vial is 0.2 x 5 = 1 mg.

That second example is the key point. Units on an insulin syringe measure volume, not medicine. On a U-100 syringe, 100 units is 1 mL. How much semaglutide sits in those units depends entirely on the vial. That is why a units number without a vial strength next to it tells you very little, and why it is worth writing both down together every time.

Compounded semaglutide calculator for any vial strength

Compounded semaglutide comes in vials at different strengths, and the strength can change between refills or between pharmacies. Compounded drugs are not FDA-approved, so the pharmacy label is your main reference. Always follow it.

A few habits make the numbers easier to trust:

If you are new to vials, the guide to starting a compounded semaglutide vial walks through the basics, and the page on compounded semaglutide dosage explains how compounded doses relate to the branded schedules.

For 0.25, 0.5, 1, 1.7 or 2.4 mg

These numbers come from the branded semaglutide labels. Ozempic starts at 0.25 mg once weekly for 4 weeks, then 0.5 mg, and may go to 1 mg and then 2 mg, each after at least 4 weeks. Wegovy steps through 0.25, 0.5, 1 and 1.7 mg every 4 weeks, reaching 2.4 mg once weekly from week 17. A higher 7.2 mg option exists in some countries; ask your prescriber. The semaglutide dosage guide covers both schedules in more detail.

To show how the units change, here is the math for two example vial strengths. These are only to illustrate the formula, not a statement about what your pharmacy sells.

At 2.5 mg/mL:

At 5 mg/mL:

Your compounded dose and schedule come from your prescriber and the pharmacy label, which may differ from the branded steps. Type your own numbers into the calculator above rather than reading off this list.

Semaglutide and tirzepatide vials use the same math

The formula does not care which medicine is in the vial. Tirzepatide vials work the same way: divide the dose by the strength, then multiply by 100. For example, 2.5 mg from a 10 mg/mL vial is 0.25 mL, or 25 units. If you use tirzepatide, the tirzepatide dosage calculator has its own common doses built in. Never reuse a units number from one medicine for the other.

How the calculator works

The calculator uses two lines of math, the same ones a pharmacist would write on paper.

  1. mL = dose (mg) / vial strength (mg/mL)
  2. units = mL x 100

The second line holds because on a U-100 insulin syringe, 100 units equal 1 mL. Every unit mark is one hundredth of a milliliter.

Take 0.5 mg from a vial labeled 2.5 mg/mL. First, 0.5 / 2.5 = 0.2 mL. Then 0.2 x 100 = 20 units. The tool shows Draw to 20 units and 0.2 mL on the syringe size you picked.

After that, it checks the volume against your syringe. If the mL needed is larger than the syringe holds, it tells you so instead of drawing a syringe that overflows. If you see that message for a dose that should be small, look for a decimal point in the wrong place. Typing 5 instead of 0.5, or 0.5 instead of 5 for the strength, changes the answer tenfold.

A few limits to keep in mind:

When you inject, the labels say to use the stomach area (at least 2 inches from the belly button), the front of the thigh or the back of the upper arm, and to rotate the spot each week. The page on injection site rotation explains how to keep track.

This is general information, not medical advice. Follow your prescriber and your pharmacy's label for your dose and how to draw it.

Your numbers stay in your browser

The calculator runs entirely in your browser. Your dose and vial strength are not uploaded, not sent to a server and not tied to an account. There is nothing to sign up for. Close the page and the numbers are gone.

The Bluedose app follows the same idea. It has no account, no ads and no tracking. Your shot history, injection sites, check-ins and weight stay on your iPhone and in your own private iCloud. You can read more on the private GLP-1 tracker page. If you want a calm place to log each dose you draw, Start for free.

Embed this semaglutide calculator on your site

Free to use on your blog or clinic site. Copy this code:

FAQ

How many units is 0.25 mg of semaglutide?

It depends on your vial strength. Divide 0.25 by the mg/mL printed on your vial, then multiply by 100. At 2.5 mg/mL that is 0.1 mL, or 10 units. At 5 mg/mL it is 0.05 mL, or 5 units. Use the strength on your own vial and check the result against your pharmacy's label before you inject.

How do I convert semaglutide units to mg?

Divide the units by 100 to get mL, then multiply by your vial strength in mg/mL. For example, 20 units from a 2.5 mg/mL vial is 0.2 mL, and 0.2 x 2.5 = 0.5 mg. Units only measure volume, so the same number of units holds a different amount of medicine in a different vial.

Can I use this semaglutide dosage calculator for Ozempic or Wegovy?

No. Ozempic and Wegovy come in pens, so there is nothing to draw up with a syringe. Follow the instructions that came with your pen and the dose your prescriber set. The calculator is for semaglutide that comes in a vial.

What kind of syringe does the math assume?

A U-100 insulin syringe, where 100 units equal 1 mL. If your syringe is marked differently, the units shown here will not match it. Ask your pharmacist which syringe goes with your vial.

Is compounded semaglutide the same as Ozempic or Wegovy?

It has the same active ingredient name, but compounded drugs are not FDA-approved, and compounded vials come in different strengths. Always follow your pharmacy's label and your prescriber's instructions for the dose and how to draw it.

Does Bluedose recommend or calculate my dose?

The Bluedose app is a personal log. It does not give medical advice and does not recommend or calculate doses. This web calculator is a separate tool that turns the dose and vial strength you type into units and mL. The dose itself always comes from your prescriber.

Why does the calculator say the dose is more than the syringe holds?

The volume for your dose is larger than the syringe size you picked. Choose a larger syringe size in the tool. If the number still looks wrong, check for a misplaced decimal point in the dose or the vial strength, and ask your pharmacist before you draw anything.

Related guides

More free tools

Log every semaglutide shot in one tap

Bluedose keeps your doses, injection sites and side effects together on your iPhone, private and with no account, so start for free on the App Store.

Free on the App Store