What the tirzepatide dosage calculator does
Compounded tirzepatide comes in vials at different strengths, so the same dose in mg will be a different number of units from one vial to the next. This tirzepatide dosage calculator does one job. It turns the dose your prescriber gave you (in mg) and the strength printed on your vial (in mg/mL) into the number of units to draw on a U-100 insulin syringe. It also shows the volume in mL and fills a syringe picture to that line, so you see the mark before you draw.
It does not choose a dose. It calculates units from the numbers you enter, nothing more. If you want to see what the label schedule looks like first, read the tirzepatide dosage guide.
The math is simple, and for many people a pencil and the formula is enough. Where it goes wrong is the decimal point. 0.25 mL and 2.5 mL look alike on a scrap of paper, and the difference is ten times the dose. The calculator removes that slip and flags any result that won't fit in the syringe you picked.
A few things to keep in mind:
- Compounded tirzepatide is not FDA-approved. Always follow the pharmacy's label. If the calculator and the label disagree, the label wins, and you should call the pharmacy.
- Pens don't need this. If your tirzepatide comes in a single-dose pen, follow the pen's leaflet. This tool is for drawing from a vial with a syringe.
- Semaglutide is a different drug. For compounded semaglutide, use the semaglutide dosage calculator, which lists semaglutide doses.
How to use the tirzepatide dosage calculator
Type your dose in mg
Enter the dose your prescriber gave you, in milligrams, in the Your dose box. Use the number exactly as written, for example 2.5 or 5. The Common doses buttons fill in the label steps for tirzepatide (2.5, 5, 7.5, 10, 12.5 and 15 mg) with one tap. They are there for convenience, not as a suggestion. Pick only the one that matches your prescription.
Enter the vial strength and pick a syringe
Find the strength on your vial or the pharmacy label. It is written in mg/mL, for example 10 mg/mL. Type it in the Vial strength box. Then choose the syringe size you have. The calculator assumes a U-100 insulin syringe, where 100 units equal 1 mL. If you are not sure which syringe you have, check the package or ask your pharmacist.
Read the units, check, then log it
The Draw to line shows the number of units, and the syringe picture fills to that mark. Below it you will see the volume in mL. Compare the result with your pharmacy label before you draw. Once the shot is done, log it so next week's number is easy to find. In Bluedose, a GLP-1 tracker for iPhone, you type the dose, tap the spot you used on the body map for injection site rotation, and the history keeps every shot. Bluedose is free on the App Store.
Tirzepatide units to mg, and back again
Most questions run one way: how many units is my dose. Sometimes you need the reverse. A pharmacy label may list units, or an old note says "draw to 50" and you want to know what that means in mg.
- mg to units: divide the dose by the vial strength to get mL, then multiply by 100.
- Units to mg: divide the units by 100 to get mL, then multiply by the vial strength.
Example with a 10 mg/mL vial: 50 units is 0.5 mL, and 0.5 mL × 10 mg/mL is 5 mg. With a vial of a different strength, the same 50 units will be a different dose. That is why a units number on its own means little. Always pair it with the strength of the vial it came from.
For 2.5, 5, 7.5, 10, 12.5 or 15 mg
These are the dose steps in the Mounjaro and Zepbound prescribing information. The label starts at 2.5 mg once weekly for 4 weeks, then goes up in 2.5 mg steps after at least 4 weeks on the current dose, to a maximum of 15 mg once weekly. 2.5 mg is a starting dose, not a maintenance dose. Compounded tirzepatide follows the pharmacy's label, and your prescriber decides your dose and when it changes. The Mounjaro dosage chart lays out the label steps week by week.
Here is what each step works out to on a 10 mg/mL vial, the example strength used on this page:
- 2.5 mg: 0.25 mL, 25 units
- 5 mg: 0.5 mL, 50 units
- 7.5 mg: 0.75 mL, 75 units
- 10 mg: 1 mL, 100 units (a full 1 mL syringe)
- 12.5 mg: 1.25 mL, 125 units (more than a 1 mL syringe holds)
- 15 mg: 1.5 mL, 150 units (more than a 1 mL syringe holds)
If your vial is a different strength, every number in that list changes. Type your own strength into the calculator rather than reading from this list. When your prescriber moves you to a new step, recheck the units the same day. The guide on a Mounjaro dose increase covers what the label says about stepping up.
For a different vial strength
The same dose in mg turns into a different number of units when the vial strength changes. A stronger vial means fewer units. A weaker vial means more.
Take 2.5 mg. From a 10 mg/mL vial it is 0.25 mL, or 25 units. If a vial were labeled 5 mg/mL, the same 2.5 mg would be 0.5 mL, or 50 units. If it were labeled 20 mg/mL, it would be 0.125 mL, or 12.5 units.
This matters most when a refill arrives at a different strength than the last one. The dose in mg may stay the same while the units change. Read the strength on every new vial before you draw, and run the numbers again. If your vial has to be mixed from powder, the strength depends on how much liquid goes in. The peptide reconstitution calculator works that part out. Follow the pharmacy's instructions.
On a 0.3, 0.5 or 1 mL syringe
On a U-100 insulin syringe, 100 units equal 1 mL, so the size of the syringe sets the most it will hold:
- 0.3 mL syringe: up to 30 units
- 0.5 mL syringe: up to 50 units
- 1 mL syringe: up to 100 units
The units for your dose stay the same whatever the syringe. Only the scale on the barrel changes. The calculator draws the barrel at the size you pick, so the picture matches what is in your hand. Ask your pharmacist which size fits your dose. If the result is more than the syringe you picked holds, the calculator shows a warning instead of a fill line.
How the calculator works out units
Two steps, both plain arithmetic:
- mL = dose (mg) ÷ strength (mg/mL). This is how much liquid holds your dose.
- units = mL × 100. On a U-100 insulin syringe, every 1 mL is 100 units.
Worked example: 2.5 mg from a 10 mg/mL vial. 2.5 ÷ 10 = 0.25 mL. 0.25 × 100 = 25 units. The calculator shows Draw to 25 units and 0.25 mL on a 1 mL syringe, and fills the picture to the 25 line.
Then it checks the answer against the syringe you chose. If the units are more than the syringe holds, it shows a warning and asks you to pick a larger syringe. If a box is empty or not a number, it asks you to fill it in rather than guessing.
That is all it does. It doesn't know your weight, your history or your prescription. It does not suggest a dose, a step up or a schedule. The label rules for tirzepatide, including the 4-week steps and the 15 mg maximum, are for your prescriber to apply. Follow your prescriber and your pharmacy's label. This is general information, not medical advice.
Private by design: it runs in your browser
The calculator runs entirely in your browser. The numbers you type are not uploaded or sent anywhere. There is no account and nothing to sign in to.
The Bluedose app follows the same idea. It has no account, no ads and no tracking. Your shots, sites, weight and check-ins stay on your iPhone and in your own private iCloud. The private GLP-1 tracker page explains how.
If you want a weekly log next to the math, Bluedose adds a reminder at the time you choose, a Lock Screen card on shot day with a Log Shot button, and a body map that suggests the next site. It works with compounded tirzepatide as well as Mounjaro and Zepbound. Start for free.
Embed this tirzepatide calculator on your site
Free to use on your blog or clinic site. Copy this code:
FAQ
How many units is 2.5 mg of tirzepatide?
It depends on the strength of your vial. From a 10 mg/mL vial, 2.5 mg is 0.25 mL, which is 25 units on a U-100 insulin syringe. From a vial of another strength the units will be different, so type your vial's strength into the calculator and check the result against your pharmacy label.
How do I convert tirzepatide units to mg?
Divide the units by 100 to get mL, then multiply by the vial strength in mg/mL. For example, 50 units from a 10 mg/mL vial is 0.5 mL, which is 5 mg. You need the vial strength for this. Units alone don't tell you the dose.
Does the tirzepatide dosage calculator tell me what dose to take?
No. It calculates units from the dose and vial strength you enter. Your prescriber decides your dose and when it changes. The Bluedose app doesn't recommend or calculate doses either. It is a personal log.
Do I need this for Mounjaro or Zepbound pens?
If your tirzepatide comes in a single-dose pen, follow the pen's leaflet. There are no units to draw. This calculator is for tirzepatide in vials, drawn with a syringe. For the label dose steps, see the Zepbound dosage guide.
What syringe does the calculator assume?
A U-100 insulin syringe, where 100 units equal 1 mL. If your syringe is marked differently, the units on this page will not match it. Check the syringe package or ask your pharmacist before you draw.
What if my dose is more than the syringe holds?
The calculator will show a warning instead of a fill line. Pick a larger syringe in the tool to see the result. For how to give that dose with your supplies, ask your pharmacist and follow the pharmacy's label.
What if I miss a tirzepatide dose?
The Mounjaro and Zepbound labels say to take the missed dose as soon as possible within 4 days (96 hours). If more than 4 days have passed, skip it and take the next dose on the regular day. Keep at least 3 days (72 hours) between two doses. For compounded tirzepatide, follow your prescriber and the pharmacy's label. The missed Mounjaro dose guide has more detail.
Related guides
More free tools
- Peptide calculator
- Semaglutide calculator
- Mounjaro dosage chart
- Wegovy dosage chart
- Ozempic dosage chart
- Half-life calculator
- Missed dose calculator
Log every tirzepatide shot in one tap
Bluedose keeps each dose, site and time on your iPhone with a shot-day reminder, and you can start for free.
Free on the App Store